Bilt Hamber Hydrate 80 (500ml)

Product Information

If you sand or grind off the Hydrate I think you would be mostly back to what you started with before Hydrate 80 went on.

All the enamel is either off already, or it's in the process of coming off, so that shouldn't be a factor in paint adhesion. Does anyone else over the age of 45 get a vague feeling of "Wrongness" about mixing metric and imperial fasteners on one machine/tool/device? a sanding pen (if larger i use a wire drill to take the worst of) then only first when i start to see some clean/bare metal i take out number 2; Phosphor acid. Hydrate-80 has been used to arrest and prevent corrosion in diverse applications – from massive marine installations to classic and historic vehicle restoration Hydrate-80 provides dependable long-term protection.The long-term performance of Hydrate-80 has been proven to significantly increase coating life in independent tests conducted by the German TÜV organisation under conditions of VDA 621-415 (6 cycles, or 1008 hrs) which included exposure to hot salt-spray, 100% relative humidity and drying atmospheres with each cycle lasting 168 hours.

This one litre bottle can be used to prevent blistering of any anti-corrosion wax, paint, or other coating you apply.

Proven long-term rust prevention over partially prepared surfaces – massively increases the life of paint applied to partially cleaned steel. Then contact your credit card company, it may take some time before your refund is officially posted. Hydrate 80 leaves a (thick) coating on the surface, yes it's meant to convert rust but then seal the surface to prevent further corrosion. Importantly for long-term protection Hydrate 80 doesnt contain chlorine which is known to transform into corrosive hydrochloric acid in rust converter applications causing under-film blistering and destruction of paint finishes or other coating products.