Cisco 1000BASE-SX SFP Module for Gigabit Ethernet Deployments, Hot Swappable, 5-Year Standard Warranty (GLC-SX-MMD) Silver

Product Information

If your Cisco products failed, you must contact your sales representative to verify product failure.

The GLC-BX80-D-I and GLC-BX80-U-I SFPs also support Digital Optical Monitoring (DOM) functions according to the industry-standard SFF-8472 Multisource Agreement (MSA). This Cisco® GLC-SX-MM-RGD compatible SFP transceiver provides 1000Base-SX throughput up to 550m over single-mode fibre (MMF) using a wavelength of 850nm via an LC connector. LX standard, operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550 m on any multimode fibers. The table provides cabling specifications for the SFPs that you install in the Gigabit Ethernet port. This feature gives the end user the ability to monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.The GLC-BX-D and GLC-BX-U SFPs also support Digital Optical Monitoring (DOM) functions according to the industry-standard SFF-8472 Multisource Agreement (MSA). GLC-SX-MMD is compatible with various Cisco networking devices and can be used with different fiber optic cables and connectors. Product Description Cisco - SFP (mini-GBIC) transceiver module - 1GbE Device Type SFP (mini-GBIC) transceiver module - LC/PC multi-mode Form Factor Plug-in module Cabling Type 1000Base-SX Data Transfer Rate 1 Gbps Optical Wave Length 850 nm Data Link Protocol 1GbE Max Transfer Distance 1 km Dimensions (WxDxH) 1.

It operates on multi-mode fiber and supports Digital Optical Monitoring (DOM) to monitor optical parameters. A 10-dB inline optical attenuator should be inserted between the fiber-optic cable plant and the receiving port on the SFP at each end of the link whenever the fiber-optic cable span loss is less than 8 dB. With its plug-and-play functionality, you can quickly and effortlessly connect the module to your network devices.For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Optical and copper models can be used on a wide variety of Cisco products and intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis. Network equipment manufacturers all have guidelines stating that warranty support on their products will not be affected. The Cisco GLC-SX-MM operates on ordinary multi-mode fiber optic link spans of up to 550 m in length.

The GLC-GE-DR-LX SFP also supports Digital Optical Monitoring (DOM) functions according to the industry-standard SFF-8472 Multisource Agreement (MSA). Cisco Capital can help you acquire the technology you need to achieve your objectives and stay competitive. A 1000BASE-BX10-D device is always connected to a 1000BASE-BX10-U device with a single strand of standard SMF with an operating transmission range up to 10 km.The GLC-2BX-D or GLC-2BX-D-I is always connected to two 1000BASE-BX10-U interfaces over two single strands of standard SMF with an operating transmission range up to 10km.

Each SFP transceiver module is individually tested to be used on a series of Cisco switches, routers, servers, network interface card (NICs) etc.

All GBICS products are CE Marked and RoHS compliant to meet the European safety directives and have passed certification for Laser Safety in UKAS accredited laboratories. The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices as depicted in Figure 2: 1000BASE-BX10-D transmits a 1490-nm channel and receives a 1310-nm signal, whereas 1000BASE-BX10-U transmits at a 1310-nm wavelength and receives a 1490-nm signal. The GLC-BX40-D-I, GLC-BX40-DA-I, and GLC-BX40-U-I SFPs also support Digital Optical Monitoring (DOM) functions according to the industry-standard SFF-8472 multisource agreement (MSA). It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability.